Polyphosphate Anti-Scale Water Filter | Express Water

Hard water is common to 85% of the north American cities and affects both those with city water and well water Hard water is caused by the presence of calcium and magnesium minerals in the water. This sticky mineral will form hard water stains on counter tops and shower walls, and will affect the way the soap lathers. Hard water problems are even worse in areas where you can't see them. Hard water build-up will form inside of pipes, on the heating coil or element in your water heater, inside shower heads and faucets, and in other areas that can't be seen or cleaned. These deposits will start to clog faucets, filters, and pipes. Water heaters and other water-using appliances will exhibit hard water problems such as a lessening in water flow, and will require repair or replacement. Hard water scale build-up will also increase energy usage in appliances, can cause them to fail prematurely. Benefits Scale Used to sequester water hardness, inhibit precipitation, and formation of mineral deposits in pipes & appliances. Iron Control Used to sequester dissolved iron up to 10 ppm; Great for lessening discoloration and metal taste for water and helps stop iron from staining sinks, showers and toilets. Applications Siliphos is great for lessening and stopping scale build up in in a wide range of applications including: Pre-filter for RO Equipment Domestic Water Systems Refrigeration Equipment Coffee Machines Water Purifying Equipment Ice Machines Normally a concentration of Siliphos at threshold levels of 0.5-5.0 ppm Polyphosphate will inhibit scale and corrosion. Use 5.0 to 10.0 pounds of beads per filter. The filter should be placed in an area where there is good water flow and should only be used with cold water. Diameter of Single Ball: 3/4 (0.75) inch Used to sequester water hardness Used to form a protective coating on metal surfaces Used to sequester dissolved iron up to 10 ppm