$ 112
4.9 (799)
In stock
Arrives by Tomorrow
.
Order within 00 hr 00 min
Save $15.68 off this item after joining.
Description
Before bonding, it is necessary to remove rust and oil from the bonding surface of the metal guide rail. First, use sandpaper, sandpaper, or wire brush to remove rust and impurities, and then clean it with acetone and let it dry. The friction coefficient of the CNC machine tool rails soft tape is small, and it has good self-lubricating and anti vibration performance, which can reduce the crawling of low-speed moving parts Paste: Before pasting, the metal surface to be pasted needs to be cleaned with acetone. When using adhesive, the thickness of the adhesive layer should generally be between 0.08-0.13mm. Curing: Curing is carried out at room temperature, curing time: 24 hours, curing pressure: 0.06-0.1MPa
